RP 80 A

Binding Machine for Insoles
Insole thermocementing and binding machine with automatic cutting of the tape. The machine is complete with table and brushless motor with automatic positioning. Optical fiber sensor for the automatic feeding and positioning of the tape. By changing the front and rear guides it is possible to use tapes in leather or synthetic, in rolls or pre-cut pieces from 14 to 25 mm. width. 

Attachment to eject the exceeding tape after cutting. Attachment to adjust the binding both on the upper and lower part of the insole. Cutting, feeding and positioning of the tape are made by means of an automatic guide with possibility to adjust the positioning point. The feeding speed of the insole can be adjusted according to the shape of the work piece and in order to facilitate the execution of the curved parts. RP 80 A can store the perimeter length of the insole in order to cut automatically the tape.

Technical data
●    Adjustable speed from 0 to 2200 r.p.m.
●    Adjustable working feed from 1 to 6 mm.
●    Guides set for tape 16 mm. width
●    Absorbed power max. 0,9 kW
●    Power supply single-phase 230 Volt 50/60 Hz
●    Permanent oil bath lubrication system
Optional
●    Guides for belts from 14 – 18 – 19 – 20 – 21 – 22 – 25
●    Machine dimensions cm. 110 x 60 x 125 h.
●    Machine weight Kg 140